The Pressures panelcalculates and displays the pressure at the customer points in your network.

1. Button to open the Pressures panel
2. Toggle bar to display or hide the pressures information 
3. Pressure range selector
4. Go to minimum pressure on the network
5. Go to maximum pressure on the network
6. Toggle to display or hide the pressure hexagons on the map

We represent the pressure results on the map with colored hexagons ranging from dark purple to light yellow, depending on the average pressure value of all the junctions considered customer points.

Qatium defines an optimal pressure range for customer points between 20-60 m (or 30-90 psi in the US system). Whenever any of the customer points has an extreme pressure value (below 20 m or 30 psi or above 60 m or 90 psi), we use that value to color it instead of the average one. 

For example: 

Although there could be some customer points within the normal operating range of pressure (46.1m), because there is at least one above 60m Qatium will show it in yellow (the color in the scale used for pressures over 60m).

You can navigate to the minimum and maximum pressures in the customer points by clicking on the hexagons in the panel. And filter by pressure range using the colored squares.

To display or hide the information within the Pressures panel, switch ON  and OFF  the toggle bar at the top of the panel. 

To activate  or hide  the Pressures overlay on the map, use the toggle at the bottom of the panel.